| Computing Platform |
| CPU |
Intel® μFC-BGA 479 Celeron® M 600 MHz with 512K L2 Cache or Intel® Celeron® M GHz with 512KB |
| Northbridge |
Intel® 852GM Graphic Memory Controller Hub (GMCH) |
| Southbridge |
Intel® 82801DB I/O Controller Hub 4 (ICH4) |
| I/O Companion |
Winbond W83697HG |
| System Memory |
1 x 184-pin DIMM socket supports up to 1 GB DDR SDRAM |
| Video |
Supports Intel® DVMT 2.0 |
| Video Memory |
64 MB shared memory |
| Audio |
VIA VT1616 |
| Serial Ports |
1 x TTL to connect to Smart Card Reader, 1 x RS-232 for optional Magnetic Strip Card Reader |
| USB |
4 x external, 1 x pin-header for T/S controller, 1 x internal for Bluetooth, 1x internal for PC camera |
| Keyboard Port |
1 x internal header |
| Mouse Port |
1 x internal header |
| GPIO |
9 x I/O lines for keypad, buzzer, on-hook, etc. |
| Thermal Protection |
Internal sensor generates interrupt |
| Watchdog Timer |
Can generate system reset from 1 sec. to 255 min. and 1 sec. or 1 min./step. |
| LAN |
Realtek RTL8100C |
| Expansion |
2 x mini-PCI slots (including one optional) |
|
| Display Screen |
| Type |
15.1? XGA TFT (1024 x 768 resolution) |
| Color Depth |
18-bit |
| Brightness |
350-nit minimum brightness |
| Brightness Control |
20% to 100% User controllable |
| Touch Screen |
Resistive |
| Touch Controller |
Internal USB |
|
| Peripherals and Device Interfaces |
| Headphone Socket |
One 3.5mm phone jack on LH side of bottom access (View from the front side) |
| Phone Handset |
Two RJ11 sockets either side of terminal |
| Smart Card Reader |
Integrated in display module |
| User Controls |
Membrane keypad integrated on front of Panel |
| USB Ports |
4 x USB 2.0 ports for external peripherals |
|
| Visual Call Indication |
| Reset Switch recess |
Internal push button in connector recess |
| Power Switch |
Power-on only button on front membrance keypad and one internal push button in connector recess |
| Display Inverter |
Power enable and separate brightness control |
|
| Audio Sub System |
| Amplifier |
0.3 W RMS headphone output per channel (minimum)
Software headphone mute
Software handset mute
Independent control of all audio channels via internal mixer |
| Phone Buzzer |
Incoming telephone call indication |
| External Speaker |
2 x 2 W 8 Ohm speaker intergraded in system housing |
|
| Peripheral Devices |
| Hard Drive |
40 GB 2.5-inch HDD |
| Power Supply Unit |
Power input: AC 90-264V
Power output: DC 19V 4.71A |
|
| Mechanical Specifications |
| Mounting |
VESA 75 mm x 75 mm mounting hole pattern |
| IP Rating |
IP65 compliance for Front Face Seal |
| Dimensions |
441.9 mm x 348.9 mm x 70.0 mm (Handset included) |
| Weight |
5 kgs / 11 lbs |
| Cooling |
Fanless design, rear heatsink with wipe clean design |
|
Click to enlarge image
Model Number
Related Keywords:
Bookmark / Share this page